Stage Announce and Program Feed

Your Arcadia Central Station is supplied with an RJ45 connector that uses a splitter cable to split into two XLR connectors. If you wish to use an external Stage Announce (SA) and Program audio (PGM), you must connect this to the RJ45 port labeled SA/PGM (port 8) on the rear of your device, and connect your input (PGM) and output (SA) to these connectors.

Navigate to Configuration > Channels in the CCM and click the add button next to the PGM and SA ports to put them into channels as required. These audio resources can be routed with Channels, Groups, Roles and Logic events (GPIOs).

Note:

These resource are unidirectional (simplex, not duplex).